- Vacuum Pump: Eurovac brand, model VT3.80, power supply AC24V, 50-60HZ, 2.2KW, maximum vacuum flow 80cbm/h, maximum vacuum pressure -85kpa
- Lifting tube: diameter 120mm, tube length 2550mm, maximum lifting height 1700mm, maximum loading 35kg for semi-porous
- 4 of diameter 100mm bellow suction pads for carton box ,the yoke dimensions was by 500mm*300mm, mounted on the control housing by flange
- A special designed lifting tube bracket make lifting tube horizontal mounted and height saved, a roller mounted on the bracket end to house the lifting tube
- A ball bearing integrated upper rotation jointer with single way valve to prevent the goods falling down in case of power lost.
- A 7-like flexible extension controller designed for higher stacking, it features by rotation lever on right hand for up&down control, and brake like lever on left hand offers quick release and separated form loads
- A metal vacuum filter mounted on the pump to keep the air clean.
- 8M vacuum feeding pipe of Diameter 32mm for vacuum connection
- A electric control box mounted on the column
The lifter was designed for transportation or handling the materials.
Max.carrying capacity: 35kg for semi-porous
Vacuum lifter components:
Extractable column：
columns：main column is 180180mm square pipe，extension column is 160160mm square pipe
actuators：dual actuators mounted sides of main column, the actuator is DC24V, speed reduced rate is 1:40, each pulling force is 6000N, locking force 8000N, working stroke 528mm, moving speed is 11mm/S,
Guidance block and wheels: the guidance blocks are made by Nylon, 4 of wheels with bearing inside for sliding
Arm lock: the lock will be automatic activated while full retracted, it also interlocked the driving unit, if the lock did not activated, the driving function will be restricted
Articulated arm：
- main load arms are made by 80*80 square pipe
- Locks: the first and third main arm have electro-magnet lock valves, to avoid the arm extension while in driving, the valves are NO
- the first arm is locked by spring lock pin
Auto driving unit
1) Dimensions: 1300780mm 2) Driving: DC batteries power,2 of DC12V, 100Ah batteries 3) Charger: input power is AC 24V, Charging power is DC24V,20Ah 4) Counterweight: about 200kg 5) Front wheels are 300mm, slave wheels, back wheel is 250mm, all wheels are no-trace rubber 6) Driving motor:800W, DC 24V 7) Accelerator: sensor control for driving speed 8) Cable reel: 1.2 Sqm12M cable inside, for AC220V power connection
Electric parts:
1) Power adaptor
2) PLC
3) Battery meter
4) Overload or over current protection
5) Start/stop and emergency stop buttons
6) Actuator control buttons
7) Electro-magnet switch button
Options:
- SUS 304 for medicine or food application
- electrostatic eliminator for electronic or explosion application
- Explosion motor and control box
